qualcomm/qbox
Loading...
Searching...
No Matches
dragonwing Directory Reference
Directory dependency graph for dragonwing:
platforms/dragonwing

Detailed Description

Qualcomm Dragonwing™ Virtual Platform

This experimental configuration describes the Qualcomm Dragonwing™ SA8775P platform in QBox. The steps below use the Qualcomm® Linux® (QLI 2.1.1) IQ-9075 EVK prebuilt image. The platform includes two Hexagon CDSP subsystems. The platform configuration is located at platforms/dragonwing/configs/fw/8775/bsp/lnx/qli_2.0/conf.lua.

Prerequisites

Follow Building QBox for the host prerequisites.

Define the QBox checkout location before preparing the downloaded image:

export QBOX=/absolute/path/to/qbox
export FIRMWARE_DIR="$QBOX/platforms/dragonwing/configs/fw/8775/bsp/lnx/qli_2.0"

Download and prepare the QLI image

  1. From your working directory (the directory containing the QBox checkout), download IQ-9075 EVK → qcom-distro → qcom-multimedia-image, QLI 2.1.1:

    curl -fL --retry 3 -o qli-2.1.1-qcom-multimedia-image.zip \
    https://artifacts.codelinaro.org/artifactory/qli-ci/flashable-binaries/meta-qcom/qcom-distro/iq-9075-evk/qli-2.1.1-qcom-multimedia-image.zip
  2. Extract the archive in that same working directory:

    unzip qli-2.1.1-qcom-multimedia-image.zip
    export IMAGES_DIR="$(pwd)/images/iq-9075-evk/qcom-multimedia-image-iq-9075-evk"

    The extracted directory contains vmlinux and rootfs.img.

  3. Convert the ELF kernel to the raw Image required by the VP bootloader. Use GNU objcopy with support for elf64-little:

    objcopy -I elf64-little -O binary \
    -R .note -R .note.gnu.build-id -R .comment -S \
    "$IMAGES_DIR/vmlinux" "$IMAGES_DIR/Image"
  4. Create or update the kernel and rootfs symlinks expected by conf.lua:

    ln -sfn "$IMAGES_DIR/Image" "$FIRMWARE_DIR/Image"
    ln -sfn "$IMAGES_DIR/rootfs.img" "$FIRMWARE_DIR/rootfs.ext4"

Keep these path variables available for the build and launch steps.

Build

cd "$QBOX"
cmake -S . -B build -DCMAKE_BUILD_TYPE=Release \
-DENABLE_DRAGONWING=ON -DENABLE_PYTHON_BINDER=OFF \
-DLIBQEMU_TARGETS="aarch64;hexagon"
cmake --build build --parallel

Run

cd "$QBOX"
./build/platforms-vp \
--images-dir "$FIRMWARE_DIR" \
-l platforms/dragonwing/configs/fw/8775/bsp/lnx/qli_2.0/conf.lua

Use these credentials to log in to the booted guest:

Username: root
Password: oelinux123

Validate FastRPC

fastrpc_test -d 3 -U 0 -t linux -a v68

A successful run reports:

[PASS] libhap_example.so
Sum = 499500
Max value = 999
[PASS] libcalculator.so
[PASS] libmultithreading.so
Total tests run: 3
Passed: 3
Failed: 0

Related guides

  • QBox build instructions
  • Documentation index